Activate Adaptive Lane Assist for Skoda Superb up to MY 2019 (Coding Guide)

Description of the Skoda Superb Adaptive Lane Assist:

Lane Assist can tell when you stray from a lane unintentionally. This system works in conjunction with a camera to recognise lane markings on the road, including yellow lines during roadworks, traffic cones, and other roadside or lane borders.

Activate Lane Assist

Let's code

Required:

  • VCDS or OBDEleven
  • Control module "A5 Front Sensor"
  • Control module "13 Auto Distance Regulator"

Before you start, open the hood. Otherwise, the change you made in the codings will be rejected.

1- Select Control Module "17 - Instruments"

Long Coding:

  • Byte 4 - Bit 6
  • Byte 11 - Bit 1

2- Select Control Module "A5 - Front Sensor" - Security Access: "20103"

Long Coding:

  • Byte 05 = Bit 6 ("ACC coded")
  • Byte 08 = Bit 5-7 "A0 Point_of_Intervention,late_setting_over_menu"
  • Byte 09 = Bit 0-1 "03 Configuration_for_lane_departure_warning_kl15,Last_setting"
  • Byte 09 = Bit 2-3 "0C Lane_Assist_system_mode,Selection_over_menu"
  • Byte 09 = Bit 7 ("HC coded")
  • Byte 17 = Bit 0 ("HC_messages coded")
  • Byte 17 = Bit 1-3 "02 Warning_intensity,Menu"
  • Byte 17 = Bit 5-7 "20 HC_Variante_1"

Adaptation:

  • HCA_On_State = "Menu"
  • HCA_Warning_Intensity = "Menu"
  • BAP Personalization = "Not Activated"
  • Point_of_Intervention(if available) = "Late"

3- Select Control Module "44 - Steering Assist" - Enter security access: "19249"

Long Coding:

  • Byte 0 = Bit 4

4- Select Control Module "5F -Information Electr"

Adaptation:

  • Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning = Set Value to “Activated
  • Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning_over_threshold_high = Set Value to “Activated
  • Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated
  • Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15

Yes, that's it. After the changes you will see the "Lane Assist" error in your dashboard. Lock car, wait 15-20 minutes. Get back in your car and start the engine. If you did it completely, the error should be gone. If the error is still there, check it again or revert it back. See you next guide...

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
http://obdeleven.com/

Leave your comment