This system with dynamic masking allows driving with high beam continuously without dazzling oncoming people. With the masking function, the high beam can be partially covered. Information about other vehicles in traffic and the level of illumination of the road is continuously measured by a camera located in the rear view mirror. Dynamic Light Assist, thereby significantly improving the overall illumination of the road.
First of all, let's learn what Traffic Jam Assist is for. "Traffic Jam Assist" allows semi-automatic convoy driving while advancing in a convoy. The system is active between 0-60 km/h. The system automatically controls the accelerator and brake pedal. For the first time, the Lane Assist function is also active here at speeds below 60 km/h. The system must detect double lane lines.
First of all, let's learn what Lane Assist is for. It helps prevent accidents caused by unintentional lane departure and increases driving safety. When the system detects that the vehicle will unintentionally drift out of its lane, it not only warns the driver visually, but also takes over the steering wheel temporarily and gently steers the vehicle towards the current lane.
Having lane assist on all the time is annoying for some of us. It's just as annoying to start off as disabled. Wouldn't it be nicer if it remembered the last setting you made instead of these two options? To do this, you will first need to unlock the SFD on MQBEvo platforms. You can use OBD11 for this.
