Description of the Sign Assist:
Sign Assist is always offered in combination with a navigation system as the traffic signs are also indicated on the display of the active navigation system (map and/or pictograms). If the front camera detects speed limits or no overtaking signs, up to three of these signs are indicated on the multi-function display ahead of the driver and on the navigation system. The navigation system displays the signs in a logical sequence together with all relevant additional information. The operative traffic sign (e.g. “130 km/h”) is always shown first, followed by signs which apply under certain conditions on a temporary basis (e.g. “80 km/h” “in wet conditions”) in second place. If the rain sensor detects precipitation, the operative traffic sign with the additional information “in wet conditions” is shown in first place.
For detailed information: https://www.volkswagen-newsroom.com/en/sign-assist-3941
Activate Sign Assist
Let's code
Required:
- VCDS or OBDEleven
- MQB Platform Car (Golf 7, Skoda Octavia, VW Passat B8, Skoda Superb MK3,VW Tiguan, Seat Leon etc) -
- Control module "A5 Front Sensor"
Before you start, open the hood. Otherwise, the change you made in the codings will be rejected.
1- Select Control Module "17 - Instruments"
Long Coding:
- Byte 05 = Bit 2 (Sign Assist installed). After doing this, you will see an error on the dashboard, don't worry :)
2- Select Control Module "A5 - Front Sensor" - Security Access: "20103"
Long Coding:
- Byte 01 = Bit 0 (Sign Assist active) or Byte 16 = Bit 4 (Sign Assist active)
3- Select Control Module "5F -Information Electr"
Adaptation:
- Car_Function_List_BAP_ traffic_sign_recognition_0x21 = activated
- Car_Function_Adaptations_Gen2-menu_display_road_ sign_identification = activated
- Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_ over_threshold_high = activated
4- If your car has a Head Up Display, it is useful to add it as well. Select Control Module "82 - Heads Up Display"
Long Coding:
- Byte 0 = Bit 0
5- If your car has a Adaptive Cruise Control (ACC), it is useful to add it as well. Select Control Module "13 - Auto Distance Regulator"
- Byte 1 = Bit 0
Lock car, wait 15-20 minutes. Get back in your car and start the engine. See you next guide...
CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
http://obdeleven.com/