How to code "Traffic Jam Assist" for VW, Seat and Skoda? (Traffic Jam Assist Coding Instructions)

What is Traffic Jam Assist (TJA)?

First of all, let's learn what Traffic Jam Assist is for.

"Traffic Jam Assist" allows semi-automatic convoy driving while advancing in a convoy.

The system is active between 0-60 km/h. The system automatically controls the accelerator and brake pedal. For the first time, the Lane Assist function is also active here at speeds below 60 km/h. The system must detect double lane lines.

System requirements:

Dual Clutch Transmission "DSG"
Adaptive Cruise Control "ACC"
Lane Keeping Assist “Lane Assist”

You learned what a Traffic Jam Assist is for. Alright. Also read the warnings below and then let's get started.

All risk is yours. We do not accept responsibility. So please be very careful! If you are an OBDEleven user, first of all, take a complete backup of your car. This coding is compatible for cars produced on MQB Platform. Example: Passat B8, Golf 7, Octavia A7, Leon 5F, Audi A3 8V...

Activate Traffic Jam Assist (TJA)

Let's code

1- Select Control Module "A5 - Front Sensor" Enter security access: "20103" and Go to Long Coding

Byte 16 - Bit 5 and Do It!

2- Select Control Module "13 - Auto Distance Regulation" Enter security access: "20103" or "20113"

Byte 1: Bit 3 and Bit 4
Byte 2: Bit 0, Bit 1, Bit 2 and Bit 4
Byte 3: Bit 5
Byte 4: Bit 2 and Bit 7
Byte 6: Bit 3 and Do It!

After doing these, lock your car and wait for 20 minutes. It's that simple. Now you will be less tired in congested traffic.See you on the next blog. Take care of yourself...

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
https://www.obdeleven.com?aff=86