After retrofit NBTEvo, you hear sound but get "No Signal" error on the screen? This issue usually happens because you didn't manually code FDL after submitting a new CAFD file. If your problem is not solved after coding below, you either made a mistake during installation or there is a problem with your display cable.
Requirements:
- Esys / BMWAiCoder 4.6 / BimmerCode (Whichever)
- BMW Enet Cable or ICOM (If you are going to code with BimmerCode, the appropriate obd adapter)
- Battery Booster (It's okay if it doesn't, but it'd be nice if it did. :)
Coding:
HU_NBT2 --> Edit FDL:
- Find "DISPLAY_VARIANTE" --> New Value: “breites_display”
- Find "DISPLAY_SIZE_RESOLUTION" --> New Value: "8.8" (If the screen size is 10.25, choose 10.25)
- Find "ID_DISPLAY_RES" --> New Value: "1280_480"
After making these changes, write the codes. If you still get the "No Signal" error, change the following codes:
HU_NBT2 --> Edit FDL:
- Find: "CID_APIX_MODE" --> New Value: "apix2"
- Find: "CID_COLOR_DEPTH" --> New Value: "24"
- Find: "CID_COM_MODE" --> New Value: "mii"
- Find: "CID_RESOLUTION" --> New. Value: "1280 x 480"
If that did not solve your problem, you will need to replace the display cable or check all other cables.
INSTAGRAM:
https://instagram.com/garagemaslakcoding