This coding can be applied to MLBEvo-based cars produced in 2019 and later. If you have a MLBEvo car manufactured before 2019, go to our other blog post Wireless Apple CarPlay and Wireless Android Auto Activation for MH2p units.
Hello everyone. In this article, I will explain the Cruise Control retrofit for the BMW F20-based 1-2-3-4 series step by step. You don't need to pay a lot for services for such an easy process. You can do it yourself very easily. Make sure you have all the necessary tools. Your job will be easier Thanks to Bimmerpost for this helpful DIY Guide.
Here is the coding cheat sheet for BMW cars with G chassis that I have prepared for you. The infrastructure of the G-Chassis cars is almost exactly the same.
This system with dynamic masking allows driving with high beam continuously without dazzling oncoming people. With the masking function, the high beam can be partially covered. Information about other vehicles in traffic and the level of illumination of the road is continuously measured by a camera located in the rear view mirror. Dynamic Light Assist, thereby significantly improving the overall illumination of the road.
First of all, let's learn what Traffic Jam Assist is for. "Traffic Jam Assist" allows semi-automatic convoy driving while advancing in a convoy. The system is active between 0-60 km/h. The system automatically controls the accelerator and brake pedal. For the first time, the Lane Assist function is also active here at speeds below 60 km/h. The system must detect double lane lines.
First of all, let's learn what Lane Assist is for. It helps prevent accidents caused by unintentional lane departure and increases driving safety. When the system detects that the vehicle will unintentionally drift out of its lane, it not only warns the driver visually, but also takes over the steering wheel temporarily and gently steers the vehicle towards the current lane.
Having lane assist on all the time is annoying for some of us. It's just as annoying to start off as disabled. Wouldn't it be nicer if it remembered the last setting you made instead of these two options? To do this, you will first need to unlock the SFD on MQBEvo platforms. You can use OBD11 for this.
