DIY Wireless Phone Charging 2017 - 2018 530i - 520i G30 Duration: 60Min You can download the DIY guide from the link at the bottom of the page.
Operating at speeds from 65 km/h (40.4 mph), Audi active lane assist helps the driver keep the vehicle in the driving lane. A camera detects lane lines and the track that the car is following between them. In this process, the camera can distinguish between yellow lines in construction zones and standard white markings.
Requirements: Esys and Esys Launcher Pro 3.0 / BimmerCode (Whichever) BMW Enet Cable or ICOM (If you are going to code with BimmerCode, the appropriate OBD adapter) Battery Booster (It's okay if it doesn't, but it'd be nice if it did. :)
BMW Disable Start-Stop or Remember Last Setting
PSdZData Full vs PSdZData Lite. Which one should I download? If you're not going to flash the ECU and just doing FDL coding then the lite version is all you need.
You can download the DIY guide from the link at the bottom of the page.
The modular longitudinal platform, MLB for short, is a platform concept with a drive train (engine and transmission) installed lengthwise to the direction of travel from Volkswagen AG. This modular system was developed at Audi and has been used there since 2007.
In order to make it easier to get in the car, the seat is automatically moved back when unlocked and then returns to its original position when the ignition is switched on. Please note that the car has to be equipped with electrically adjustable seats with memory function.
Hello. In this article, I prepared the hidden feature unlock codes for Volkswagen Golf 7, which was produced between 2012 and 2017, with devices such as OBDEleven - VCDS. Be careful, you may damage your vehicle. If you're coding with OBDEleven, do a full backup. If you are doing it with VCDS, do not make any changes without AutoScan. This hidden feature coding process also applies to all other MQB-based cars.
High-beam assist utilizes a camera mounted on the interior mirror. It detects light sources – the headlights of oncoming vehicles, tail lights of other road users and the reflections of municipality limit signs, for instance – and automatically switches between high beam and low beam lighting. This provides for better visibility and a more relaxed driving experience. Drivers of oncoming vehicles are not blinded by glare.
